STREAMCORE SG3412, Deployment Manual, Page: 9 / 25

Streamcore.com Page 9 on 25
2021 Streamcore SAS - All rights reserved
Undocumented commands:
======================
EOF help
[SG3412 > maintenance]
Figure 2 - Available commands in Maintenance
It is also possible to connect as user boot to the StreamGroomer with the boot menu by Telnet, RSH or SSH from the SGM.
Only one user can be connected on the boot menu at a time.
4.3.3 Maintenance Menu
The following table lists the commands available in Maintenance menu:
Commands Description
configure
Enters configuration mode
exit Leaves the current mode. If changes are pending, a confirmation is requested
ping [IP_add] Sends ICMP ECHO_REQUEST to a network host. Specify an IP address as destination.
reset_configuration
All the operational software and configurations are thus deleted, the name of the
StreamGroomer and the parameters of the interface providing access to the SGM are set
on the default value attributed at the factory. This option requires certain precautions.
restart [A/B/U] Restarts the SG in the chosen version (OPE A, B or Boot)
show […]
Displays various information about the SG and the admin network. See the table
hereafter.
traceroute [IP_add]
Traces path to a network host. Specify an IP address as destination.
help Lists the available commands
The following table lists the parameters of the show command:
Show command details Description
show arp
Lists the entries of the ARP table
show changes
Presents the changes between the current configuration and the pending changes
show conf
Presents the current configuration
show date
Shows the system date and the last time update (every day at midnight)
show interface
Gives the active status of the interface with its IP Address, MAC Address, MTU and
transmitted volume
show iprouting
Presents the admin routing table of the SG
show version
Presents the type of the SG, its serial number, the installed and activated version
of the SG
4.3.4 Examples
The following examples show the outputs of the
show
commands:
Example 1: Display the software versions installed on the SG:
[SG3412 > maintenance] show version
Running OS : BOOT StreamCore-USINE-M4G64-S37-e1906c3689fe
SG flash type : M4G64
SG type : SG3412