User manual for C6D
For more information, please visit our website
www.en.streamax.com
6
- 7
6PIN DIN JACK female signal input line
3.
FAQ
1) The system can’t start?
a. Check the input power, whether the power wire is connected correctly, whether the ground
wire is connected back to the battery, and whether the fuse on the power wire is in good condition.
b. Check whether the ACC signal wire input to the power is with voltage higher than 7 V.
2) The device restarts uninterruptedly?
a. Check whether the voltage of MDVR is insufficient. If the voltage is less than the start-up
voltage of the device, the device would always restart.
b. The problem in hard disk/SD card may cause the failure to start. Take off the storage part
and check whether it is broken down.
3) The device can’t record?
a. Check whether the storage disk is installed, whether it is in good contact, and whether the
disk can be read normally in computer.
b. Check whether the storage disk is formatted. The storage disk should be formatted before
normally storing record files.
c. Check whether there is video signal input into the device from camera, and whether there
is video/image on the screen.
4) There is no voice in record file?
a. Check whether there is an external pickup, or whether the camera features with the
function of audio collection.
b. Access to Video Channel Settings, check if Audio is set on.
c. There must be video input into the channel for recording and it must record normally.