Stream NXT - assembly instructions
Recommended settings
CG (measured from root leading edge):
Speed/launch camber (+down, near the wing root):
Cruise camber (+down, near the wing root):
Thermal camber (+down, near the wing root):
Aileron deflections (+down, -up):
Elevator deflections (+down, -up):
Rudder deflections (+left, -right):
65-70mm
0mm
+2mm
+5...+8mm
+12/-12mm
+9/-9mm
+15/-15mm
Kit contents: wing, fuselage, tail feathers, small parts.
Small parts supplied with the kit.
Servo locations have the skin indented for covers. Your kit may have
the servo wells already made at the factory. If so, you can skip a few
steps.
