Connecting Your Wireless Music Gateway:
The Ultra Wireless Music Gateway will allow you to transmit audio
from your
Bluetooth
®
-enabled phone or music player to your stereo
and will also allow you to receive audio from your stereo to your
Bluetooth
®
-enabled headphones. Follow the steps below to properly
connect and set up your devices.
Follow the below steps to properly install your Wireless Music
Gateway
Step 1. Connect the 3.5mm audio cables to the gateway and your
stereo as shown in the
Connection Guide
above.
Step 2. Connect the power adapter to the Ultra Wireless Music
Gateway and the closes wall outlet as shown in the
Connection
Guide
above.
Step 3. Make sure the power indicator light of the wireless gateway is
illuminated.
Follow the below steps below to enter into
Transmit Mode
Step 1. Follow the instructions provided by the manual of your
Bluetooth
®
headset to enter into pairing mode.
Step 2. Keep the
MULTI FUNCTION BUTTON
on the wireless
gateway pressed for 3 seconds until the
Bluetooth
®
indicator light
flashes and the
TRANSMIT MODE
LED illuminates. The wireless
music gateway will then begin searching for any available stereo
Bluetooth
®
headsets to pair with.
Note:
Device pairing name will be "Ultra Stereo" or "Voiis Stereo"