Strautmann Giga-Vitesse CFS 3602, Operating Instructions Manual

Page: 42 / 327

Product description
Giga-Vitesse CFS 3602 - 4402, Giga-Vitesse CFS 3602 DO - 4402 DO 03.18 42
2.14.1 Tailgate on machines without beaters
When lifting the tailgate, the hydraulic cylinders
(1) first vertically lift the tailgate (2) out of its
locking mechanism (3). The tailgate then swivels
upwards to the rear and rises completely.
When lowering the tailgate, it initially comes
down due to its dead weight. The hydraulic
cylinders only come into operation at the last
moment to close the tailgate and lower it
vertically onto the locking pin (4) for being
locked.
An electrical pressure switch as signal generator
for the automatic charging system is mounted on
the inside of the tailgate.
Fig. 28
2.14.2 Tailgate on machines equipped with beaters
When lifting the tailgate, the hydraulic cylinders
(1) first vertically lift the tailgate (2) out of its
locking mechanism (3). The tailgate can then be
opened at different opening widths.
The first opening width of the tailgate (discharge
position) can be individually set via the control
set and the tailgate is automatically moved to
that position when pressing the
"Lift tailgate"
key. When releasing and pressing the " Lift
tailgate" key again, the tailgate rises as long as
the key is pressed or until the tailgate has been
completely lifted.
When lowering the tailgate, it initially comes
down due to its dead weight. The hydraulic
cylinders only come into operation at the last
moment to close the tailgate and lower it
vertically onto the locking pin (4) for being
locked.
Fig. 29