Strautmann Giga-Vitesse CFS 3602, Operating Instructions Manual

Page: 134 / 327

Operation
Giga-Vitesse CFS 3602 - 4402, Giga-Vitesse CFS 3602 DO - 4402 DO 03.18 134
6.1 ISOBUS control / Field Operator 120
6.1.1 Design of ISOBUS control
The ISOBUS control complies with the latest ISO standard.
If your tractor's software and hardware comply with the latest ISO
standard, you will not require our control set. You will then be able to
directly operate the machine via your tractor control set.
The included ISO cable harness is not compatible with LBS or LBS-
Plus.
The ISOBUS control set is automatically switched on and off when
the tractor ignition is turned on and off. In case of longer downtimes
of the machine, additionally disconnect the mobile tractor connecting
cable.
Fig. 81
The ISOBUS control mainly consists of:
•
the control set (1),
•
the control unit (2),
•
the sensors (3) to determine operating states, e. g. Steering Axle Locked or Steering Axle
Unlocked,
•
the connecting cable (4) for the silage additive pump (5) (optional extra).
The control set (1) is mounted on the tractor and is connected to the control unit (2) of the machine via
the connecting cable (6).
All functions required for operating the machine as well as for transport journeys are actuated via the
keys (7) of the control set. The symbols on the keys identify the executable functions.
After a key has been pressed, the control unit triggers the corresponding solenoid valve at the electro-
hydraulic control block (8) to carry out the selected function. Individual sensors (3) determine the
respective operating state of the selected assembly, e. g. Steering Axle Locked or Steering Axle
Unlocked. The operating states are graphically shown on the screen (9).