Strautmann Giga-Vitesse CFS 3602, Operating Instructions Manual

Page: 105 / 327

Commissioning
105 Giga-Vitesse CFS 3602 - 4402, Giga-Vitesse CFS 3602 DO - 4402 DO 03.18
7. Shorten the propeller shaft such that the minimum free space (X) is 40 mm in its shortest
operating position.
Fig. 51
8. Observe the operating instructions for the propeller shaft when determining the length and when
shortening the propeller shaft.
9. Reinsert the shortened propeller shaft halves into each other.
10. Lubricate the p.t.o shaft of the tractor and the input shaft of the gearbox before coupling the
propeller shaft.
5.8 Adjust mounting height of folding drawbar
Have the mounting height of the folding drawbar adjusted to the respective tractor model by an
authorised workshop, in order to ensure that the lowered pick-up can properly adapt to uneven terrain.
Only a properly adjusted mounting height of the folding drawbar guarantees best possible picking-up
of the material to be loaded.
WARNING Risk of being crushed, drawn in, becoming entangled and risk
of impact to people if the hitched machine accidentally loosens
from the tractor due to worn drawbar lug and coupling bolt!
Ensure that there is enough free space between the drawbar lug
and the coupling bolt when lifting the folding drawbar.
Only an authorised workshop is allowed to adjust the mounting
height of the folding drawbar!
The distance X between the ground and the
machine frame must be 1300 mm with the forage
wagon with lowered folding drawbar hitched up to
the tractor.
The mounting height of the folding drawbar in
relation to the machine frame must be aligned by
means of the threaded spindles of the hydraulic
cylinders if the actual distance X is not 1300 mm.
Fig. 52