Stratus V 6624, Hardware Installation Manual

Page: 65 / 78

Replacing a U779V Fabric Switch
Removing and Replacing a U779V Fabric Switch A-11
12. Standing at the front of the cabinet, slide the switch completely out of the cabinet
( Figure A-9 ).
Figure A-9. Sliding Fabric Switch Out of Cabinet
Replacing a U779V Fabric Switch
N O T E
The front of the fabric switch, where the cables attach to
ports, is at the rear of the cabinet. The rear of the fabric
switch, where the power cables attach, is at the front of
the cabinet.
1. If the replacement fabric switch is not shipped with attached side rails, remove the
side rails from the defective switch and attach them to the replacement switch.
a. Remove the screws from the side rails on the defective switch.
removefabricswitch