Component Location and Cabling Summary
3-4
Stratus ftServer V 2302, V 4304, and V 6308 Systems: Site Planning Guide
(R624)
The lengths of supplied cords and cables dictate the maximum distance between the
ftServer V 2302, V 4304, or V 6308 system and its external components.
summarizes these constraints.
Telephone
Telephone cord (1)
Customer
Ensure that the cord is long enough
to reach from the telephone service
jack to the telephone near the PC
console.
Optional available
Ethernet ports
(embedded or PCI
adapter)
Ethernet cable (1
for each optional
port used)
Customer
Ensure that cables are long enough
to reach from site Ethernet port, hub,
or switch. Cable type varies,
depending upon the type of Ethernet
adapter. See the
Stratus ftServer
Systems: PCI Adapter Guide
(R461)
for specific cable requirements.
Optional U760
Eight-Port Serial
Synchronous
PICMG 2.16
Adapter (in optional
NIO enclosure)
RS-232C, RS-449,
or V-35
Stratus
Optional NIO enclosure to network
connection—12ft. (3.65m)
Table 3-2. Location of V Series System Components
(Page 1 of 2)
Component
Location of Component
External Component
Location
AA-E97900 RSN console server
Free standing, outside the
system cabinet
Place within 9 feet of system
(length of Ethernet cable
minus vertical runs)
AA-C72100 modem
Free standing, near the system
cabinet
Place in close proximity to the
RSN console server
UPS (2)
Outside the system cabinet
Place within 8 feet of system
(length of PDU AC input
cords minus vertical runs)
PC Console
Outside the system cabinet on a
table or other suitable surface
Place immediately next to
system (length of Ethernet
cable minus vertical runs)
Telephone
Near the PC Console
Place within 17 feet of system
Table 3-1. Cord and Cable Summary
(Page 2 of 2)
Component
Cord or Cable
Type and Number
Source
Description
