Stratus ftServer V 2302, Hardware Installation Manual

Page: 66 / 78

Powering On the System
2-32 Stratus ftServer V 2302, V 4304, and V 6308 Hardware Installation Guide (R003S)
4. At the rear of the cabinet, turn on the power switch on the network I/O enclosure,
if one is connected ( Figure 2-26 ).
Figure 2-26. Powering On the Network I/O Enclosure
5. At the front of the cabinet, turn on the power switch on the fibre channel tape drive
( Figure 2-27 ).
Figure 2-27. Powering On the Fibre Channel Tape Drive
6. Turn on the power switch on the side of the C720V modem ( Figure 2-11 ).
7. Power on the PC console. See the PC console’s documentation for more
information.
vos071a
Power switch
DLT
SDLT 600
DLT
SDLT 600
vos139b
Power Button