Stratus ftserver 3300, Site Planning Manual

Page: 55 / 138

Communicating with a UPS over a Network
UPS Planning 5-5
APC UPS Models for Use with a Single ftServer 3300 System
Table 5-7 lists the Smart-UPS models to use with a single rack-mountable ftServer
3300 system.
Table 5-8 lists the Smart-UPS models to use with a single pedestal ftServer 3300
system.
Communicating with a UPS over a Network
Use the following additional tools to enable an ftServer system and a UPS to
communicate over the network:
•
APC Network Management Card EX (APC part number AP9617)
An APC Network Management Card EX is a standard component of the Symmetra
UPS, but you must purchase the network card for the APC Smart-UPS
®
.
•
APC PowerChute
®
Network Shutdown for the ftServer system
When you install your ftServer system, download PowerChute Network Shutdown
from APC and install and configure the tool on the ftServer system, as described
in the
Stratus ftServer Software Installation and Configuration Guide (R002W).
PowerChute Network Shutdown monitors the UPS for an imminent power loss, and
initiates a shutdown of the system before power is lost.
Table 5-7. APC UPS Models for a Single Rack-Mountable ftServer 3300 System
Locale Smart-UPS AC Power Input AC Power Output
North America Model SUA1500RM2U 120V 120V
Japan Model SUA1500RMJ2U 80V to 123V 100V
Rest of the world Model SUA1500RMI2U 160V to 286V 120V or 208V
Table 5-8. APC UPS Models for a Single Pedestal ftServer 3300 System
Locale Smart-UPS AC Power Input AC Power Output
North America Model SUA1500 120V 120V or 208V
Japan Model SUA1500J 80V to 123V 100V
Rest of the world Model SUA1500I 160V to 286V 230V or 240V