Stratus ftserver 3300, Site Planning Manual

Page: 38 / 138

Power Outlet Requirements
4-6 Stratus ftServer 3300, 5600, and 6600: Site Planning Guide (R553)
If you do not use PDUs in the cabinet, use Tables 4-10 and 4-11 and to determine the
number of power outlets required outside the cabinet.
1. In the Quantity column, write the number of each type of component.
2. Multiply the value in the Quantity column by the value in the Outlets column, and
enter the total in the Subtotal column.
3. Add the values in the Subtotal column and enter the sum next to TOTAL NUMBER
OF EXTERNAL POWER OUTLETS.
Table 4-8. Worksheet: A-Side External Power Outlet Requirements - PDUs Used
Component Quantity Outlets Subtotal
PDUs x 2
External monitors x 1
External tape drive x 1
Other external components
TOTAL NUMBER OF A-SIDE POWER OUTLETS
Table 4-9. Worksheet: B-Side External Power Outlet Requirements - PDUs Used
Component Quantity Outlets Subtotal
PDUs x 2
External monitors x 1
External tape drive x 1
Other external components
TOTAL NUMBER OF B-SIDE POWER OUTLETS
Table 4-10. Worksheet: A-Side External Power Outlet Requirements - No PDUs
Component Quantity Outlets Subtotal
Systems x 1
Monitors x 1
Storage enclosures x 1
T521 and T522 tape drives x 1
TOTAL NUMBER OF A-SIDE POWER OUTLETS