Stratus ftserver 3300, Site Planning Manual

Page: 131 / 138

Standards Compliance D-1
Appendix D
Standards Compliance
D-
ftServer systems comply with the electromagnetic interference (EMI), immunity, safety,
and noise regulations listed in Tables
D-1 through D-4 . All necessary agency labels are
on the system.
N O T E S
1. This system must be configured with the components
listed and described in the product configuration
specifications. Deviations from this list of components
will void agency certification.
2. You must install all wiring, including power and
communications cables, in compliance with local and
national electrical code (in the United States, national
electrical code NFPA 70). In addition, you must use
shielded communications cables to remain in
compliance with Federal Communications
Commission (FCC) and other international
Electromagnetic compatibility (EMC) regulations.
3. All EMC emissions compliance tests are performed at
a third-party certified test laboratory. You can obtain
compliance reports for these tests from your Stratus
account representative, who will contact the Product
Compliance Group in the Stratus engineering
organization.
Table D-1. EMI Standards
Standard Description Country/Region
FCC Part 15 Class A Code of Federal Regulations 47 (1998)
Class A North America
EN 55022 Limits and methods of measurement of radio
disturbance characteristics of Information
Technology Equipment European Union