CONTROL - BACK PANEL :
10 2 6
9
7
12
AUDIO
SLAVE
OUT
4
VIDEO
MONITOR
OUT
IDE-SUB
USB
+ -
SENSOR INPUT
SENSOR
OUTPUT
AC100-240V,50/60Hz
AC INPUT
POWER
MAIN S/W
CH4
CH2
VIDEO INPUT
CH2
CH4
CH1
CH3
+ -
1
2
3
+ -
AUDIO INPUT
+ -
+ -
CH1
CH3
RS-232
11 1
3
4
5
8
1. BNC Camera Inputs -
Channel 1-4 camera inputs (for cameras with BNC Video outputs)
2. 6 Pin DIN Camera Inputs -
Channel 1-4 Camera inputs (for cameras with 6 Pin DIN camera outputs).
3. RCA Audio inputs -
Channel 1-4 Audio inputs (for cameras with RCA Audio outputs)
4. Slave A/V Out -
Audio/Video Out signal for transmitting to a Slave Monitor or VCR.
5. Monitor A/V Out -
Audio/Video output to another monitor.
6. Alarm Function Terminals -
These terminals are used to connect external motion sensors.
7. Sensor Output -
These terminals are used to connect external Alarm Output devices, such as a
siren or security light.
8. IDE-SUB -
This connector is used to connect an external Slave HDD.
9. RS-232C Terminal -
Connects to the RS-232C terminal on your computer. For more information on
RS-232C communication, refer to Appendix #4.
10. MAIN POWER SWITCH -
Used to turn the system ON or OFF.
11. AC INPUT
–
Connects to a Power Plug (AC100-240V, 50/60Hz).
12. USB Port
–
Connects to a PC using a USB cable
-16-
USB