FINIAL
Provides decoration
at the apex of the
gable end frame.
PURLIN INTERSECTION
COVER
TEMPLATE
Fastened to hip
rafters to cover
purlins and
attach deck.
Used to mark the
purlin cover for
cutting around
purlins.
BEAM TO BEAM BRACKET
BEAM FILLER
Connects horizontal
beams.
Fills gap
between
intersecting
beams.
PARTS DESCRIPTION
1
BARGE CAP
The barge cap covers
the area where the
deck finishes at portal
frame.
SCREWS AND RIVETS
Fastener types vary depending
upon the connection, ensure
correct fixings are used.
14 x 95
12 x 20
10 x 16
RIVET
RIDGE KNUCKLE
Slots inside the gable rafters to
form connection at the ridge.
RIDGE CAP
This flashing covers the
roof sheets at the gable
ridge and the Gazebo End
hips.
22 or 30 END
RAFTER
BRACKET
Connects rafters to
header beam on an
infill gable.
º
º
END STRUT
The gable infill is
supported by the
end strut, which
consists of a section
of post.
22 or 30 END
STRUT PLATE
Secures the end
strut at the ridge.
º
º
PURLINS
Purlins provide support for
cladding.
RAFTERS
Gable Rafters
consist of pre-cut
120 Outback
beam.
®
SOAKER FLASHING
The soaker flashing
water proofs the rear
of the gable and
conceals the existing
house gutter.
PERIMETER
BRACKET
This bracket
fastens the
rafters to the
gazebo fascia
beam.
APEX BRACKET
This bracket fastens the hip
rafters to the apex of the gable
frame.
ANGLED INLINE
CONNECTORS
135°Angled Purlin
Connector.
67.5° Angled Inline
Connector.
BOLTS
Fastener types vary depending
upon the connection, ensure
correct fixings are used.
M10 HEX
HEAD BOLT
M12 HEX
HEAD BOLT
CUPHEAD
BOLT
RAFTER TO
VALLEY
BRACKET
This bracket
fastens the
rafter to the
valley beam.
SPACERS
Are used to prevent the
150 attachment beam
from crushing.
HEADER BEAM BRACKET
Connects end strut to header
beam on an infill gable.
HEADER FLASHINGS
Run along header beam to
neatly finish the base of
infill panels.
PANEL STRIPS
Decorative strips fixed to
infill panels.
INFILL PANEL
Cut to suit gable end
frames.
POST BRACKET
POST CAP
Connects post
to beam.
Fills gap between
post and beam.
