STRATCO EZI-FENCE DESIGN GUIDE
MIDDLE OF FENCE RUN
Using the Ezi-Fence bracket kits, install the panels to either
side of a post to continue a fence run.
END/START OF FENCE RUN
Use posts to start and end a fence run. Posts are to be fixed
to the ground using either Base Plates (for fixing to concrete
slabs or other hard surfaces) or by concreting the post in
place. Install brackets to posts, then affix fence panels to
brackets.
JOINING FENCE RUN TO EXISTING WALL
Ezi-Fence panels can be fixed to an existing wall simply by
using the brackets in the same way as they would be fixed
to Ezi-Fence posts.
CREATING A 90° CORNER
Posts can be used to create a 90° corner between two fence
panels.
ADDING A GATE
Gates must be attached using latch and hinge hardware
(sold separately) to either posts or existing walls.
*Please refer to your hinge kit details for gate opening
allowances.
EZI-FENCE DESIGN GUIDE
The following design guide is to be used to assist in the
design of a fencing layout. Once the layout of a design has
been finalised, the exact number and type of boxes can be
selected.
Ezi-
Fence Post
Ezi-
Fence Panel
Ezi-
Fence Brack
et
Post
Fence Panel
Brack
et
Fence Panel
Brack
et
Brack
et
Fence Panel
Existing W
all
Post
Fence Panel
Brack
et
Ga
te
Fence Panel
Brack
et
Post
Ga
te
Existing W
all
Existing W
all
LOCKS AND HINGES ARE AVAILABLE AT:
http://ddtechglobal.com/product/brand/truclose-heavy-
duty-brand
