Site Preparation Guide
Preparing For Installation
Page 18
Unpacking the Resin Vat
1. Remove the top and front panels from the vat shipping crate.
2. From the bottom front of the resin vat, use a m6 hex nut driver to remove the lag screws (2)
securing the vat restraining brackets (2) to the shipping crate base (
). Save the
brackets and lag screws for re-crating.
3. Lift the resin vat off of the shipping crate base and carefully lower it to the floor.
Figure 13: Resin Vat
4. Set aside the shipping crate to be reassembled/packed for storage.
5. Remove the lid from the resin vat and set it aside to be reassembled/packed for storage.
D
Caution:
Two people are required to lift the resin vat.
Resin
Vat
Restraining
Brackets