Stratasys uPrint, Service Manual, Page: 65 / 383

4-18
Figure 4-36: Upper electronics bay cover bottom mounting screw locations
5.
Lift the cover up and off of the top mounting screws.
Installing the upper electronics bay cover
1.
Slide the cover down on to the top left and right side mounting screws.
2.
Using a
5
⁄
16
” nut driver or standard screwdriver, reinstall the bottom left and right side
mounting screws.
3.
Using a
5
⁄
16
” nut driver or standard screwdriver, tighten the top left and right side
mounting screws.
4.
Install the side panels. See Installing the side panels on page 4-8.
5.
Install the top panel. See Installing the top panel on page 4-6.
Remove the bottom left and
right mounting screws