Stratasys uPrint, Service Manual, Page: 233 / 383

5-24
Figure 5-318: Measuring distances from outside edges of C and F
14.
Measure and record the distance from the outside edges of circles F and I. See Figure 5-
319.
Figure 5-319: Measuring distances from outside edges of F and G
15.
Measure and record the diameter of circle F along the center line between C and I. See
Figure 5-320.
Figure 5-320: Measuring diameter of circle F
16.
Add the lengths derived from steps 13 and 14 (C-F and F-I) and then subtract the width
of circle F derived from step 15 . Record this total as “GRight”
17.
Measure and record the distance from the outside edges of circles A and D. See Figure 5-
321.