Stratasys uPrint, Service Manual, Page: 221 / 383

5-12
Figure 5-292: Measuring distances from outside edges of D and E
21.
Measure and record the diameter of circle D along the center line between C and E. See
Figure 5-293.
Figure 5-293: Measuring diameter of circle D
22.
Add the lengths derived from steps 19 and 20 (C-D and D-E) and then subtract the width
of circle D derived from step 21 . Record this total as “GLR”
23.
Measure and record the distance from the outside edge of the small bump on circle A to
the outside edge of circle D. See Figure 5-294.
Figure 5-294: Measuring distances from outside edges of A and D