Stratasys uPrint, Service Manual, Page: 160 / 383

uPrint/uPrint SE Service Manual 4-113
Figure 4-195: Head cooling fan mounting bracket screw locations
18.
Let head cooling fan hang off to side.
19.
Using a
5
⁄
16
” nut driver or standard screwdriver, remove the 4 foam insert retaining
screws and washers. See Figure 4-196.
Figure 4-196: Foam insert retaining screw locations
20.
Remove the foam insert.
21.
Using a
5
⁄
16
” nut driver or standard screwdriver, loosen but do not remove the 4 Y motor
mounting bracket mounting screws. See Figure 4-197.