Stratasys uPrint, Service Manual, Page: 131 / 383

4-84
Umbilical Hose
Required Tools
•
5
⁄
16
” nut driver or standard screwdriver
•
1
⁄
4
” nut driver
•
5
⁄
32
” allen wrench
• Cutters
Hardware
• Wire tie
• 10-32 x
3
⁄
8
” slotted screws (x7)
•
1
⁄
4
- 20 x
1
⁄
2
” button head cap screws (x2)
Removing the umbilical hose
1.
Remove the top panel. See Removing the top panel on page 4-5.
2.
Remove the side panels. See Side Panels on page 4-7.
3.
Remove the upper electronics bay cover. See Removing the upper electronics bay cover
on page 4-17.
4.
Using a
5
⁄
16
” nut driver or standard screwdriver, remove the right side access panel
mounting screws and remove the panel. See Figure 4-143.
Figure 4-143: Right side access cover mounting screw locations
Remove the 7
mounting screws.