Troubleshooting
Controller is Off
Page 23
© Copyright 2019 Stratasys. All rights reserved.
Stratasys Confidential
To check and replace a fuse:
a. Disconnect the unit from the wall socket.
b. On the back of the unit, unscrew the fuse covers.
Figure 16: Fuses
c. Check the fuses with an ohm meter or continuity tester.
d. Replace the fuses and make sure to orient them correctly.
Figure 17: Figure 17 Insert the fuse in the correct direction
A blown fuse usually indicates that there is an electrical fault.
