Strata CIX 200, Programming Manual

Page: 225 / 508

Station
Assignment
Strata CIX Programming Vol.1 12/09
5-21
St
a
tio
n
•
Attendant – Assign Out Dial, Attendant Answer, Overflow, Position Busy, Trunk Test, Attendant Loop
or Supervised Loop Key Attendant features to this FB.
•
ACD – Assign Log In/Out, Available/Unavailable, Work Unit, ACD Help, ACD Pickup, End WrapUp,
Join ACD Call, Monitor ACD Call, Start/End Shift, Display Status, or UCD Agent Login/Out features
to this FB.
•
One Touch – Assign FB as a One Touch button. See ”Setting the One Touch Button’ on page 5-21.
•
Split – Assign FB to Split the connected party and the conference master from the conference (for
private call). (Join button is used to reconnect both parties to the conference.) The Split button
should
not be assigned to a DKT2304-CT cordless telephone.
•
Blank – Clear FB assignment.
6. Click on one feature in the sub-parameter dialog box. If no other settings are required, the FB displays
an abbreviation for the selected feature or if you select Directory No, CO Lines or Door Lock
parameters, additional fields are required. See the tables that follow for more details.
7. Follow the directions in each pop-up dialog box. To modify an existing feature button double-click the
feature button and make the change in the appropriate dialog box that displays.
8. Click Submit .
Cross Copy
Use the following steps to cross copy keys from one station to the keys of another station’s keypad:
1. From the Key Page, enter the Prime DN.
2. Click Submit .
3. Click the Cross Copy button. The Source and Target
Copy screen displays (shown right). Enter the “Copy
To” PDNs or click
Select to select the target PDN.
4. From the Source DKT, select key to be copied.
5. Click the Copy Now button.
6. Click Done . Target DKT with the copied key displays.
7. Verify the key copied.
Setting the One Touch Button
Follow the step above 1~8 above to assign an FB as a One Touch button. Then complete the following
steps:
1. Double-click the key assigned as One Touch.
2. Enter the One Touch data, then click OK .
Example 1: Setting up a One Touch button to transfer to Voice Mail.
Select the Cnf/Trn from the white box on the right, CNF displays in the One Touch Data field. Then
type #407 after CNF displays in the One Touch Data box. It adds Cnf/Trn #407 in the One Touch Data.
Click
OK . Then click Submit .
Example 2: To originate a call from the PDN, select the FK as 01 if the PDN is on the first key then add
the telephone number next to FK01 in the One Touch Data box.
Cancel clears the changes and takes you back to the previous page.
DP5000 and IP5000 series Large Screen telephones can offer 10 more flexible keys. In addition to the added
10 keys, a dedicated Call History button gives access to the Caller ID history of incoming calls. Also, dial by
name directory enables calling by pressing the button associated with the name of the person (R5.2 MT021
software or higher on Release 4.0 processors). On Strata CIX systems running this version of software the