14
www.strata.co.nz
ADVANCEARC 400 • ADVANCEARC 500
4. Disconnect input power before installing or ser-
vicing this equipment. Lock input power, discon-
nect switch open, or remove line fuses so power
cannot be turned on accidentally.
5. Properly install and ground this equipment ac-
cording to national, state, and local codes.
6. Turn off all equipment when not in use. Discon-
nect power to equipment if it will be left unat-
tended or out of service.
7. Use fully insulated electrode holders. Never dip
the holder in water to cool it or lay it down on the
ground or the work surface. Do not touch hold-
ers connected to two welding machines at the
same time or touch other people with the holder
or electrode.
8. Do not use worn, damaged, undersized, or poorly
spliced cables.
9. Do not wrap cables around your body.
10. Connect work piece to a good electrical ground.
11. Do not touch the electrode while in contact with
the work (ground) circuit.
