5
3.
Press the Play/Start button to save the minutes value. The Timer button and Scroll
Wheel will blink for about 3 seconds, indicating that your timer is properly set. Once
the temperature reaches the target temperature, the timer will start the
countdown.
Setting the Flow Direction
The cooker can circulate water in a clockwise or counterclockwise direction. Additionally, it
can be set to direct the output of the pump into the side of the container, to protect
delicate foods, such as eggs or salmon, or to prevent the water jet from being blocked by
food.
1.
Twist the Pump Cap clockwise to unlock it from the Pump Housing.
2.
Position the openings in the side of the Pump Cap, as desired. Insert the retaining
tabs into the slots, then turn the cap counterclockwise to lock it in place.
Calibrating the Temperature
The temperature sensor on the cooker is extremely accurate and is calibrated at the
factory. However, if you want the readings on the cooker to match that of your
thermometer, perform the following steps to recalibrate the cooker.
1.
Determine the difference between the temperature reading on the cooker and the
temperature reading on your thermometer. You can change the cooker's reading by
up to ±9.9°C.
2.
Press and hold the Temp button for about 5 seconds. The display will show 0.0°.
3.
Use the Scroll Wheel to add or subtract up to 9.9°C.
4.
Press the Temp button to save the set value.
Summary of Contents for 21594
Page 1: ......
