ZI de Bel Air 44850 LE CELLIER FRANCE [email protected] Tél. +33 (0)2 40 25 46 90
UA452SC24A_A - SC24 Autonom control console.docx
Page 4
VARIOUS CONFIGURATIONS
Programming and backup of the time lengths
The time lengths (24 and 14 seconds) can be modified.
These data are saved in memory in case the control console is switched off.
Press the ON/OFF key until the console displays the welcome screen.
As soon as the control console displays the welcome screen: keep key
1
pressed: the control console
enters in "24 seconds" programming mode.
Shorten the time with key
2
or increase it with key
3
. Enter with key
1
: the control console enters in "14
seconds" programming mode.
Shorten the time with key
2
or increase it with key
3
. Enter with key
1
: the time lengths programmed are
saved in memory in the control console.
Switch off the control console by keeping the ON/OFF key pressed.
Language of the control console
The control console is programmable in different languages.
Press the ON/OFF key until the console displays the welcome screen.
The remaining battery charge level is indicated next. If the battery charge is insufficient, power can be
supplied by plugging in the power supply supplied.
Keep key
2
pressed for 1 second.
Select "Language" with key
1
.
Select the language needed with keys
2
and
3
(drop-down list) and enter the choice with key
1
.
Switch off the control console by keeping the ON/OFF key pressed.
Control console transmission mode
The control console is equipped with 6 different pre-set transmission frequencies (channels) and can also
be used in cable transmission mode.
Press the ON/OFF key until the console displays the welcome screen.
The remaining battery charge level is indicated next. If the battery charge is insufficient, power can be
supplied by plugging in the power supply supplied.
Keep key
2
pressed for 1 second.
Select "Radio" with key
4
.
Select the radio channel needed or the cable transmission mode (the radio transmission mode is off)
with keys
2
and
3
(drop-down list) and enter the choice with key
1
.
Switch off the control console by keeping the ON/OFF key pressed.
