22
Video Timing Dialog
Opens the "Horizontal Sync & Chroma Timing" dialog box, used to control the
horizontal sync offset and chroma phase when the board is in GenLock
mode. The sync offset can be varied increments of 37ns and the chroma
phase in increments of 360/256 (1.40625) degrees.
Note that the Video Timing Dialog is disabled when Video Standard = Auto.
To use the Video Timing Dialog, a specific video standard must be selected.
Help
About the Stradis Professional Decoder
Display the software revision number and copyright information.
Multiple Decoders in a Single Computer
To use multiple Stradis MPEG-2 Decoders simultaneously in one computer, multiple
instances of the decoder application (Smpegdec.exe) must be run. This can be done by
adding the program argument -X where X is the decoder board number (1 through N).
Example: From the DOS command line enter the following commands to get two
decoder applications running simultaneously,
Smpegdec -1
Smpegdec -2
You can also set up a Windows shortcut that has the -X as the program parameter
where X is the board number (1 through N).
