EN - 10
3.2. Thermostat Setting
The freezer and refrigerator thermostats
automatically regulate the temperature
inside the compartments. Rotate the
knob to a higher position, from 1 to 6, to
obtain colder temperatures. During cooler
seasons, set the thermostat to lower
positions to reduce energy consumption.
Thermostat knob
Thermostat settings:
1 – 2 :
For short-term storage of food in the
freezer compartment.
3 – 5 :
For long-term storage of food in the
freezer compartment.
5 – 6 :
For freezing fresh food. The
appliance will work longer. Once the food
is fully frozen, reset the thermostat to its
original position.
3.3 Temperature Adjustment Warnings
•
It is not recommended that you
operate your fridge in environments
colder than 10°C in terms of its
efficiency.
•
Do not start another adjustment
while you are already making an
adjustment.
•
Temperature adjustments should be
made according to the frequency of
door openings, the quantity of food
kept inside the fridge and the ambient
temperature in the location of your
fridge.
•
In order to allow your fridge to reach
the operating temperature after being
connected to mains, do not open
the doors frequently or place large
quantities of food in the fridge. Please
note that, depending on the ambient
temperature, it may take 24 hours
for your fridge to reach the operating
temperature.
•
A 5 minute delay function is applied to
prevent damage to the compressor
of your fridge when connecting or
disconnecting to mains, or when an
energy breakdown occurs. Your fridge
will begin to operate normally after 5
minutes.
•
Your appliance is designed to operate
in the ambient temperature (T/N =
16°C - 43°C) intervals stated in the
standards, according to the climate
class displayed on the information
label. We do not recommend
operating your appliance out of the
stated temperature limits in terms of
cooling effectiveness.
Climate
Class
Ambient Temperature
o
C
T
Between 16 and 43 (°C)
ST
Between 16 and 38 (°C)
N
Between 16 and 32 (°C)
SN
Between 10 and 32 (°C)
3.4 Accessories
3.4.1 Ice Tray
•
Fill the ice tray with water and place in
the freezer compartment.
•
After the water has completely frozen,
you can twist the tray as shown below
to remove the ice cubes.
