11.100
and ‘A’ symbol appear when you are asked
to enter in an end time, or when you
would like the oven to switch itself off.
To set the time of day
• Press the Up and Down buttons
together for a few seconds, and
release.
• The ‘ •’ in between the numbers on
the LED Display will begin to flash.
• While the ‘ •’ is flashing it is possible
to adjust the time using the Up and
Down buttons. Once the time has
been set, allow approximately 30
seconds before using any of the other
timer functions. This ensures that the
time will remain correct.
To select an alarm tone
There are three tones to choose from.
• Press and hold the down button to
listen to the first tone.
• Release the down button and press it
again to listen to the second tone etc.
• Releasing the down button after the
tone has sounded will automatically
select that tone.
Setting the minute minder
• To set the Minute Minder, press the
Function button once. The bell sym-
bol will appear and start flashing. The
flashing only lasts for 5 seconds so
the time must be set within this time
frame.
• Use the Up and Down button to set
the length of time required. Once this
has been done, the Minute Minder is
set.
• When the desired length of time has
counted down the alarm will sound.
• To cancel the tone, press any of the
buttons.
• To cancel the Minute Minder at any
time, press the Up and Down buttons
together.
USING THE CLOCK/PROGRAMMER-ELEC(
if
fitted
)
