Cleaning
Stainless steel surfaces
(stainless
steel finish models only)
FACIA PANEL
,
HANDLES
Only use a clean cloth wrung out in hot
soapy water, and dry with a soft cloth.
Stubborn marks can be removed using
“Luneta”. We recommend that you
clean the whole of the stainless steel
area to maintain a uniform finish.
Supplies can be purchased from
H.R.P.C. - contact direct sales order line
✆
01772 819 672.
Do not use undiluted bleach or any
products containing chlorides as they
can permanently damage the steel.
Extra care should be taken when
cooking food in salted water. Some
foods are corrosive - eg; vinegar, fruit
juices and especially
salt
- they can
mark or damage stainless steel if they
are left on the surface. Turn off and
wipe any spillage immediately, taking
care to avoid skin contact with any hot
surface or spillage.
Sharp objects can mark the surface of
stainless steel, but marks will become
less noticeable with time.
To maintain the finish of the stainless
steel, or to remove any greasy marks,
wipe the stainless steel surface
sparingly with a
minimum
amount of
“Johnson’s Baby Oil” and kitchen
paper. Do not use cooking oils, as
these may contain salt, which can
damage the stainless steel surface.
22
25277 00 - SN GL916 23/10/2002 12:28 Page 24
