Programmer / Clock
18
To set the time of day
u
Press the Plus and Minus buttons
together for a few seconds and
release.
u
Set the time of day using the Plus and
Minus buttons. Press once for single
digit increase, press and hold for
rapid increase..
u
Once the time of day has been set
wait approx 10 seconds until the ‘
l
’
stops flashing.
u
Use the appliance as normal.
To select an alarm tone
There are three tones to chose from.
u
Press the
minus
button to listen to the
first tone.
u
Release the
minus
button and press it
again to listen to the second tone etc.
u
Releasing the
minus
button after the
tone has sounded will automatically
select that tone
Setting the minute minder
u
To set the Minute Minder, press the
Function button once. The bell symbol
will appear and start flashing. The
flashing only lasts for 5 seconds so the
time must be set within this time frame.
u
Use the Plus and Minus button to set
the length of time required. Once this
has been done, the Minute Minder is
set.
u
When the desired length of time has
counted down the alarm will sound.
u
To cancel the tone, press any of the
buttons.
u
To cancel the Minute Minder at any
time, press the Plus and Minus buttons
together.
A
27007 01 - P1 600EF 28/8/07 11:46 Page 20
