Page 4 of 10
Line up & Place the EMU on the screw heads and slide it down.
Ensure that the cable is properly routed back to the Power Box.
USING STOVE GUARD
The new Guardian model is a product that unites all three user selectable Stove Guard’s models: Now there is one model
that does it all.
The
Basic
model developed to satisfy most Home user’s needs.
The
Delay
model allows cognitive users to easily change settings, while thwarting a “button pusher” user attempts to
disable the device. (“Press & Hold” button when changing settings.)
The
Password
model version features password locking, for managed-care type situations. Administrators can set
the device to the User’s particular needs, and then password lock it.
The Stove Guard has 4 operating modes to control the stove: AUTO, TIMER, SG-OFF, and STOVE-OFF.
AUTO
This is recommended mode - provides the maximum protection & no further setting is required.
The AUTO mode allows the PIR (
motion detector
) in the EMU to automatically shut the stove off if the user is out of the
sensing area for longer than the preset time (
1 minute is the factory-preset time
). When the user re-enters the sensing
area
approximately 10-12 feet (3-4m) line of site from the EMU
, the Stove Guard will turn the stove back on and reset
timer to the last preset time. There is no need to reset the timer each time.
The green AUTO indicator lights. Green movement indicator lights every time when movement is detected and resets
clock to the preset time. Display will show number of minutes left before Stove Guard turn off the stove if no movement is
detected. If no movement is detected (user turn on the stove and left kitchen) for the preset time Stove Guard will turn off
the stove, display will show
00
and red Stove Off indicator (#12 on EMU diagram) lights. The display will show
--
when
neither top stove nor oven is turned on (no current is detected for more then 4 minutes and 40 seconds).
TIMER
The green TIMER indicator lights. In TIMER mode stove will operate for preset time (default is 5 minutes), which can be
adjusted to the cooking time of specific dish. Once the preset time is over, the stove will turn off. Display shows number of
minutes left before Stove Guard turns off the stove. When decimal point between digits lights display shows hours and
tenth of hours left (if countdown time is above 99 minutes). Movement detection is disabled in timer mode.
SG-OFF
The red SG OFF indicator lights. When the Stove Guard is in the SG-OFF (Stove Guard Off) mode the stove retains its
regular function, and the Stove Guard’s safety features are inactive. The display is blank. For safety reason one hour after
Stove Guard is in the SG-OFF mode and the stove is turned off (current is not detected) Stove Guard automatically goes
back to AUTO mode.
STOVE-OFF
The red STOVE-OFF indicator lights. When the Stove Guard is in STOVE-OFF mode the stove is turned off (same as
unplug the power cord). The display is blank.
HOW TO ADJUST THE STOVE GUARD
[1] SG-OFF button
When holding for 3 seconds change Stove Guard mode to SG-OFF.
Pressed instead holding for STANDARD model.
[2] AUTO button
When pressed turns the Stove Guard in AUTO mode and resets preset time.
