EN
14.
INSTRUCTION
(2) in and turn approximately 90 degrees so it is in the “IN” position.
The correct pressure for this SUP board is:
Maximum 1 bar / 15 PSI (=1000 mBar)
DO NOT EXCEED THIS!!
Using an electrical pump or air compressor is at your own risk. This can lead to damaging
the SUP board.
DETACHABLE FIN ON BACKSIDE OF SUP BOARD
It is recommended to use the detachable fin in deep water, where it will allow you to
move forward in a straight line. Do not use it in shallow water because then the skeg can
hit the bottom. The fin can be placed on the SUP board if this is inflated or deflated.
Push the fin in the black part on the
bottom side of the SUP board.
Then slide the fin to the front of the black
box.
Assemble the fin
To lock the fin, fasten the screw into the
fin and screw-plug.
Summary of Contents for GLOBAL 12'6
Page 1: ......
