Tel: +44 (0) 1279 419913
www.stortech.co.uk
Whilst every effort has been made to ensure the
accuracy of the information provided, no liability can
be undertaken for any errors or omissions. All
dimensions stated in this document are approximate.
Stortech Electronics Ltd reserves the right to alter the
specifications and introduce changes without prior
notice. © Stortech Electronics 2017
MDVR402_Quick Guide 05072017
MDVR402 Series
2.
Device Front and Rear Panel
LED Indicators
•
[PWR] Power LED
•
LED light means the system has powered on
•
[VLOS] Video Indicator
•
LED On – Video loss; LED Off – Video normal
•
[SD1] SD indicator
•
LED Off – Card does not exit; LED On-Card recording; LED Flash slow – card exists but not
recording
•
[SD2] SD Indicator
•
The same as with SD1 indicator
•
[IR] Infrared remote control receiving interface
****Status LED Flashing in circulation means the device is booting up****
Back Panel
•
[DC-IN] Power port
•
Red cable connect power positive, black cable connect power negative, yellow line ACC
signal cable
•
[AV1-AV4] 1-4 CH Video and Audio input interface include DC 12V output
•
[AVOUT] Video and Audio output interface, include DC 12V output
•
[GPS] Built-in GPS module antenna interface
•
[3G] Built-in wireless communication module antenna interface
•
[SENSOR] Extension Function interface
•
[VGA] Video output interface
If you need timed or ignition recording, please connect the ACC cable to the vehicle ACC supply
