Audio-Nav
Technical Manual
The content of this communication and/or document, including but not limited to images, specifications, designs, concepts and information is
confidential and is not to be used for any purpose or disclosed to a third party without the express and written consent of
Keymat Technology Ltd., Copyright 2020. All rights reserved.
1400 Series Audio-Nav Technical Manual Rev 2.1
www.storm-interface.com
Page 12 of 14
Using the Windows Utility to change USB Codes
Each product version has its own (free to download) version of the utility
If any other keypad utility software is installed (e.g EZ-Key Utility) then you should un-install that before you start.
System Requirements
The utility requires .NET framework to be installed on the PC and will communicate over the same
USB connection but via the HID-HID data pipe channel, no special drivers are required.
Compatability
Windows 10
Windows 8
Windows 7
Windows Vista
Windows XP
Only if you install .NET framework
The utility can be used to configure the product to
•
Select Code Table
•
LED brightness (0 to 9)
•
Test Audionav
•
Create customised keypad table
•
Reset to factory default
•
Load Firmware
API for controlling the AudioNav device from the Host Computer
It is also possible to control the AudioNav device programmatically using an API (free to download) from a host
that has USB capabilities.
-----------------------------------------------------------------------------------------------------------------------------------------
Instructions
Utility
API
AudioNav
v5.0
v4.0
AudioNav External Mount
AudioNav EF
v2.0
v1.0