1200 Sub-Miniature Keyboard for Public Environments
Application/Engineering Manual
This document is provided for use and guidance of engineering personnel engaged in the installation or application of STORM data entry products
manufactured by Keymat Technology Ltd. Please be advised that all information, data, and illustrations contained within this document remain the
exclusive property of Keymat Technology Ltd. and are provided for the express and exclusive use as described above. This document is not
supported by Keymat Technology’s engineering change note, revision or reissue system. Data contained within this document is subject to periodic
revision, reissue or withdrawal. Whilst every effort is made to ensure the information, data and illustrations are correct at the time of publication,
Keymat Technology Ltd. are not responsible for any errors or omissions contained within this document.
www.storm-interface.com
1200 Application/Engineering Manual Version 1.2 Feb 2016 Page 4
Section 3. Installation into Host Equipment
The 1200 Series Sub-Miniature Keyboard must be securely fitted into a facia panel or equipment casing.
For effective resistance to vandalism, abuse and rough use the keyboard should be installed from the
underside of a panel, with the operational face of the keyboard accessible through a rectangular aperture
in the panel, see Appendix 2.
The keyboard is securely held in place by a retaining plate (supplied as part of the mounting kit, part number
1200-MK000x) which is positioned over 8 M3 x 16 mm studs, see Appendix 2.
Recommended dimensions and profile for the panel aperture and positions of the fixing studs are detailed
as “non-revision supported copy”. The keyboard’s integral sealing rib (positioned on the top face of the
peripheral flange) is compressed between the flange’s top face and the rear surface of the fascia panel.
The rear surface of the fascia panel must be rigid, flat and free of debris to achieve rated resistance to
water and dust. The keyboard’s integral seal should be checked to ensure it is free from damage and debris
prior to installation or refit.
The overall dimensions are as shown below:
1200 Series Sub-Miniature Keyboard
Overall Length mm (ins)
175,0 (6.8 in)
Overall Width mm (ins)
85,0 (3.3 in)
Overall Depth underpanel mm (ins)
21,5 (0.85 in)
Weight (kg)
0.549
