Storkcraft 03683-00 AC Series Manual Download Page 3

felt pad under any items you place on the finish.

- Clean with a damp cloth, then a dry cloth to preserve the original luster and beauty of this fine finish.
- Do not use abrasive chemicals.
- Do not spray cleaners directly onto furniture.
- Lift slightly when moving on carpeting to prevent leg breakage.
- Use of a vaporizer near furniture will cause wood to swell and finish to peel.

damp, cold basement. These extremes can cause a loss of structural integrity.

- To preserve the luster of the high quality finish on your product, it is recommended to place a doily or

questions.

- Do not store the product or any parts in extreme temperatures and conditions such as a hot attic or a

- Do not scratch or chip the finish.
- Inspect the product periodically, contact Stork Craft Customer service for replacement parts or

 

:

E

C

N

A

N

E

T

N

I

A

M

 

D

N

A

 

E

R

A

C

 

N

O

 

S

E

T

O

N

-To assemble this unit you may be required to place the unit on it’s side and face. It is strongly

recommended that assembly is done on a soft, non-abrasive surface to avoid damaging the finish.

the diagram of the item which is drawn actual size and design. Be sure to use the proper size and
shape specified in the instructions.

-Must be assembled by an adult.
-Includes small parts with sharp points which could be hazardous to children.
-Care should be taken when unpacking and assembling this product.
-During the assembly process whenever using screws or bolts, check each by placing the screw/bolt on

NOTES ON ASSEMBLY: 

.To avoid head injury, do not allow children to play underneath open drawers.
.Do not leave drawers open when not in use.

.Accessory Items must be securely fastened to this product according to the instructions provided with 
those items.

.Do not allow standing in drawers.
.Do not allow standing on top of this product.

.ALWAYS install tipover restraint provided.
.Place heaviest items in the lowest drawers.
.NEVER put a TV on this product.
.NEVER allow children to stand, climb or hang on drawers, doors, or shelves.
.NEVER open more than one drawer at a time.
 .Use of tip-over restraints may only reduce, but not eliminate, the risk of tip-over.
.Always monitor your child’s activity when in the nursery.

Children have died from furniture tipover. To reduce the risk of
furniture tipover: 

'LVWULEXWHGE\
6WRUNFUDIW0DQXIDFWXULQJ,QF+RZDUG+XJKHV3DUNZD\8QLW

/DV9HJDV1986$

7_(FXVWRPHUFDUH#VWRUNFUDIWFRP_7ZLWWHU#6WRUNFUDIW

3

Summary of Contents for 03683-00 AC Series



































Reviews: