WeZee Disk details
LED Battery status
LED Read/Write
LED WIFI
LED WAN
PORT WAN RJ45
Reset button
PORT USB 3.0
PORT USB 3.0
Power On/Off
Port WAN RJ45
: To connect weZee Disk to the Internet through Router/Switch
USB 3.0 connector
: To transfer data with very high transfer rate and to charge the
battery.
Power On/Off
: Press during 3 seconds to turn on/off the device.
USB Host
: Power Bank Mode; to recharge your smartphones or tablets (weZee'Disk
turned off), Max power=5V/1A
Reset Button
: To set the weZee'Disk to factory parameters, press on the button 5
seconds when the weZee'Disk is turned off.
LEDBattery
:
a) Tunred off when:
-The device is turned off.
-The battery is completely charged (weZee’Disk connected to the power supply).
b) Green to indicate that the battery charging level is OK.
c) Green, blinking slowly (2s) to indicate that the battery is charging.
d)Green, blinking fast (0,5s) to indicate that the unit will power off.
e) Red, blinking slowly to indicate that the battery charge is less than 30%.
f) Red, blinking fast to indicate that the battery is completely discharge.
LED Read/Write
: The read/write LED :
a) White when the device is connected through USB 2.0
b)Blue when the device is connected through USB 3.0
c)Blink when transferring data.
LED Wi-Fi
: The WiFi LED is :
a)Blue, blink when device is in use.
b)Blue when device is ready to use.
LED Wan
: The Wan LED is :
a) Green when the internet connection is ready.
b) Lite off, when internet connection is found.
