8
H
OW TO USE
IND’FLY
BEFORE FLING
Battery installation :
1. Open the battery compartment cover from the transmitter.
2. Install 4 AA batteries in accordance with the +/- poles.
3. Close the battery compartment cover from the transmitter.
Turn on the remote :
Turn on the drone :
1. Place the camera on the ground.
2. Open the cover of the battery compartment of the device.
3. Place the battery in the compartment with the power cord to the outside.
4. Connect the battery and the drone by the power cord.
1. Move the left
joystick all the way
down.
2. Turn on the radio
control.
3. Open the battery
compartment and
insert the battery.
Connect the battery to
the drone.
4. Turn on the drone
DR- BEE (the LED
under the drone arm
flash fastly).
5. Place the drone
DR- BEE horizontally,
on a flat and clear
area.
6. Push the joystick
left at the top and at
the bottom, you will
hear a "beep"
indicating that the
R/C is connected to
the drone (LEDs are
fixed). The drone is
ready to fly.