SKU 93198
For technical questions, please call 1-800-444-3353.
Page 3
7.
Use eye protection. Always wear ANSI approved impact safety goggles
when setting up this product.
8.
Maintain products with care. Keep the Bin Rack clean for better and safer
performance. Follow instructions for set up. Inspect periodically.
9.
Do not overload the Bin Rack. The weight capacity is 5 lbs. per bin.
Warning: The warnings, cautions, and instructions discussed in this instruc-
tion manual cannot cover all possible conditions and situations that may oc-
cur. It must be understood by the user that common sense and caution are
factors which cannot be built into this product, but must be supplied by the
user.
Unpacking
When unpacking this product, check to make sure that all parts are included
as shown in the parts list. If any parts are missing or broken, please call
Harbor Freight Tools at the number below.
Assembly
1.
Attach the right and left Stands (2) to the
Rack (1), using Bolts (7), Washers (6) and
Nuts (8).
See Figure 1 and Parts
Diagram on Page 5.
2.
Tap the Plugs (5) on each end of the
Stands (2), right and left. (Qty.4).
See Figure 1.
Figure 1
Rack (1)
Stand (2)
Bolt (7)
Washer (6) (qty. 2)
Nut (8)
Plug (5)
