storchenmuhle NIKI KID, Manual

Page: 32 / 148

- 32 - EN
INSTALLATION OF THE CHILD CAR SEAT
3) Size class 100-150 cm, forward-facing
1 . First fold in the support leg and retract it completely. The support leg is not
needed in this size class.
2 . The 5-point harness of the child car seat must be stowed as previously de-
scribed. It is not needed in this size class.
3 . Press the two lateral Isofix connector buttons to extend the Isofix connectors.
4 . Guide the Isofix connectors to the Isofix anchor points on the car seat and
snap them into place.
5 . Push the child car seat in until it rests securely against the backrest of the seat
of the vehicle. Ensure that both Isofix indicators are switched to green.
6 . Thread the diagonal belt of the 3-point belt in the car through the diagonal belt
guide on the headrest of the child car seat.
7 . Thread the lap belt of the car's 3-point belt through the first lap belt guide in the
seat area of the child car seat.
8 . When placing your child in the child car seat, turn the car seat towards the car
door for convenience.
9 . Put your child in the child car seat.