66
Area measurement
Briefly press the
button.
The
(area) s y m b o l
is shown in the display.
Press the
button to measure
the first distance (e.g.,
length)
Press the
button to measure
t
h
e
second distance
(e.g., width)
The result is automatically deter-
mined and shown in an
xx²
for-
mat.
Volume measurement
Press the
button twice until
the
(volume) symbol is
shown in the display.
Press the
button to measure
the first distance (e.g.,
length)
Press the
button to measure
t
h
e
second distance
(e.g., width)
Press the
button to measure
the third distance (e.g.,
height)
The result is automatically deter-
mined and shown in an
xx³
for-
mat.
Indirect measurement (Pythago-
ras)
determining a distance with two
measurements
Indirect measuring is used to
measure distances that cannot
be measured directly because an
obstacle would block the laser
beam, or there is no suitable tar-
get surface as a reflector.
Indirect measurement for deter-
mining a distance with 2 auxiliary
measurements.
Press the
button until the
symbol appears in the dis-
play. The distance to measure
first is shown as a flashing line in
the symbol.
Point to the top point and press
the
button. After the first
measurement, the first value is
displayed. Now level the laser
measuring device horizontally to
the extent possible.
Initiate the second measurement
by pressing the
button.
The result is automatically deter-
mined and shown in the display.