7. Press the latch on the outside rail of the drive drawer to disengage it, then carefully slide the drawer
back into the enclosure, making sure that it is flush with the rest of the front panel.
Figure 3-14: Disengaging the drawer side rail latch
8. Turn the lock counter-clockwise to lock the drawer into place.
The
STAT
LED on the front of the drawer turns from amber to green to let you know that the drive
drawer is properly latched. The
ENV
LED lights up green to let you know that the fan is functioning
properly and that the drawer temperature is within specifications.
9. In the Nexsan GUI, go to the
Home
page and verify that the status bar for the new fan assembly is
green. See
Home Page
in
Chapter 3
of the
Nexsan High-Density Storage User Guide
for more
information.
Rear drive drawer fan assembly
32
Part Number: P0450137, Rev. B
Nexsan BEAST™ and E-Series™
3
Summary of Contents for NEXSAN E18
Page 4: ...Glossary 35 Contents iv Part Number P0450137 Rev B www nexsan com Nexsan BEAST and E Series...
Page 8: ...About this manual viii Part Number P0450137 Rev B www nexsan com Nexsan BEAST and E Series...
Page 22: ...Adding disk drives 2 22 Part Number P0450137 Rev B www nexsan com Nexsan BEAST and E Series...
Page 34: ...Central fan tube 3 34 Part Number P0450137 Rev B www nexsan com Nexsan BEAST and E Series...
