Completing the Installation
6
Completing the Installation
Compete the following procedure to complete the
installation:
1. Check that the bus configuration, to include
configuration address is correct.
2. Replace the side cover.
CAUTION
Install the side cover before turning the power on.
3. Connect the external SCSI cable and the ac power
cord.
4. Turn on the pedestal and check that the pedestal is
operating properly and that the devices respond
when the SCSI bus is active.
March 1995
Digital Equipment Corporations makes no
representations that the interconnection of its products in
the manner described in this document will not infringe
existing or future patent rights, nor do the descriptions
contained in this document imply the granting of license
to make, use, or sell equipment or software in accordance
with the description.
This product has not been tested for compatibility with
all other products or devices supplied by Digital
Equipment Corporation or third parties. Unless
specifically stated by Digital to the contrary, purchaser
assumes all responsibility for testing and ensuring the
Digital StorageWorks products, when combined with
other products, address their particular needs.
StorageWorks and the DIGITAL logo are trademarks of
Digital Equipment Corporation.
