3–6 Configuring the Pedestal
3.6 Setting the Configuration Address
There are both configuration addresses and device addresses. Jumpers W1-W3 determine the
eight configuration addresses that can be used for both 8-bit (addresses 0-6) and 16-bit
(addresses 0-6 and 8-14) devices.
Note
SCSI device address 7 is the SCSI controller address.
Use jumpers W1-W3 to set the address configurations. Figure 3–6 shows the location of
connector J18 and the jumpers. Table 3–5 defines the slot addresses assigned for each of the
eight address configurations. Figure 3–7 shows the standard configuration cabling.
Figure 3–6 Address Configuration Jumpers
W3
W2
W1
J17
J18
J9
J14
CXO-4476A-MC
Figure 3–7 BA346–KB Standard Configuration
CXO-4550A-MC
J10
INPUT
CABLE
J11
J16
J17
JUMPER
CABLE
TERMINATOR
STANDARD
CONFIGURATION
J18
IN
OUT
W1 W2 W3
SCSI ADDRESS 0
SCSI ADDRESS 1
SCSI ADDRESS 2
SCSI ADDRESS 3
SCSI ADDRESS 4
SCSI ADDRESS 5
SCSI ADDRESS 6
Summary of Contents for BA346-K Series
Page 38: ......
