StorageTek L180, Service Manual

Page: 52 / 266

Configuration Overview
2-8 Fifth Edition 95897
Library Information
The Library Configuration Menu lets you modify the library’s configuration.
From this menu, you may access editing menus for setting the library’s interface
identifier, Fast Load status, date and time.
Figure 2-4 shows an example of the library configuration screen.
Note: The sequence of this configuration assumes that you will make all
entries at one time. Each item is saved as it is changed, except for the
library’s SCSI ID or Fibre Channel Port 0 address.
To save a revised library SCSI ID or Fibre Channel address, you must
reset the library by pressing the
RESET
button.
Setting the Library SCSI ID
The Lib SCSI I/F Config Menu lets you view the library’s SCSI type (differential
or single-ended) and access an edit menu for the library’s SCSI ID.
Figure 2-5 shows an example of the library SCSI interface screen.
If the control path for the library is SCSI, you must set a SCSI ID for the library
at the operator panel.
Figure 2-4. Library Configuration Menu
LIB CONFIG MENU:
LIB SCSI I/F ID: 00
FAST LOAD: OFF
DATE: 03/01/2004
TIME: 23:59
AUTO CLEAN: OFF
USER CELLS: 84
Figure 2-5. Library SCSI Interface Configuration Menu
LIB SCSI I/F CONFIG MENU:
SCSI TYPE: DIFFERENTIAL
LIB SCSI I/F ID: 00