Page 6
3.4 – POWERING ON THE DVR
To turn the unit on, slide the power switch to the left. The “Power” LED on the front of the DVR will light up red to
indicate power.
To turn the unit off, slide the power switch back to the right. The “Power” LED on the front of the DVR will be
extinguished.
3.5 – PAIRING THE CAMERA TO THE DVR
The camera is paired to the DVR in the factory, but if for some reason they become unpaired (e.g. prolonged period
of no signal), you may need to re-pair the units.
To pair the camera and DVR:
1.
Remove the visor from the camera (slide it off).
2.
Unscrew (anti-clockwise) the lens cover.
3.
Press the small black PAIR button located just below the infra-red LEDs.
4.
Press the PAIR button on the DVR.
5.
Replace the lens cover on the camera.
Summary of Contents for Wireless CCTV Starter Kit
Page 1: ......
Page 16: ...Page 16...
