5
B - FRAME INSTALLATION (Refer to figure 2 for the full diagram)
Figure 2
1.
Connect the
Top bent tube
(part code 1), the
Middle Bent Tube
(part code 2) and
the
Sidewall Bent Tube
(part code 3) with the
Bolt M8x70
(part code 9); these
make one group of arches. Please NOTE the direction of the bolt.
DO NOT
install
the bolts on the top of the truss where the fabric will rest.
2.
Insert one end of the assembled arch into one base plate and force the other end
of the arch into the opposite base plate. Secure the arches to the base plates using
the bolts.
Figure 3
