Stonex S9i GNSS Receiver – User Manual
19
5.4.1 Device register
The register code is a 32 digits and letters, you could register the device via
WEB UI function. The detailed steps as follow.
In management page, you could see “registration”. Input register code to
“Authcode” then click submit, the receiver will be registered.
Figure 5 - 5 Registration
You could also register device via controller with surpad software if installed
on your controller . Connect S9i with the surpad software . Click “About”, you
will see “Register instrument”, then click it. The last step is inputting code,
then finish registration.
5.5 Settings
“Settings” includes “Working Mode”, “Device Configuration” and “NMEA
Message”. Here will introduce every selection.
